LIMITED RUN!! FW3T STAINLESS STEEL TRIPLE LED FLASHLIGHT
IF YOU WOULD LIKE SECONDARY LEDS ADDED TO YOUR LIGHT PLEASE ADD THE FOLLOWING MOD SERVICE TO YOUR CART. SECONDARY LED MOD SERVICE
HYPER GLOW GASKETS WITH CUT OUTS FOR SECONDARIES
CARLCO CLEAR NARROW OPTICS ARE AVAILABLE HERE
HYPER GLOW GASKETS FOR STANDARD TRIPLE OPTICS
GLOW TAIL SWITCH BUTTONS
TACTICAL LANYARD RING
FW3A Germany User manual
FW3A English User manual
The FW3A was designed by Fritz15 and the flashlight forums TLF & BLF.
Brought to life by Lumintop
A small 18650 triple LED lamp with tail switch and agreat, a compact, ergonomic, feature-packed EDC-style light.
More detail in TLF
More Detail in BLF
Emitter: Three LEDs on a copper DTP MCPCB e.g.
Cree XP-L HI 3D(NW 5000K) and Cree XP-L HI 7A(WW 3300K) LED
Cree XP-L HI 1A(CW 6500K)
Nichia 219C 4000K
Optic: Standard TIR Carclo 10511 (matte)
Lens: Glass with anti-reflective coating
Flux: ~2800 lm (XP-L Hi), ~1600 lm (Nichia)
Intensity: ~12 500 cd ANSI throw ~223 m (XP-L Hi)
Firmware: The FW3A uses free software called Andúril,
distributed under the terms of the GPL v3. Code is available from
User interfaces:  By default the FW3A is set to use SMOOTH RAMPING.
Instant access to TURBO mode is also provided.
 A more conventional STEPPED RAMPING UI is available if you
like discrete modes level. You can choose how many steps you want.
 MOMENTARY mode is useful for signaling purposes or rapidly/briefly
lighting up targets. To exit this mode, physically disconnect power
 MUGGLE mode uses a reduced output.
 It has an electronic LOCKOUT for safety, but acts also as momentary
low light.Other functions: Battery check, sunset, beacon,
tactical strobe, party strobe, bike flasher, candlelight, lightning storm
Battery: One flat-top or button-top 18650 cell. An unprotected cell is recommended.
Max. length 66 mm. Cell is not included.
Driver: FET+7+1 driver. Low parasitic drain while OFF
Switch: Electronic tail switch
Ingress rating: Equivalent to IPX7
Weight: Approximately 53 g without cells
Size: 25.5 mm Ø head x 92.5 mm length.
CREE XPL HI 1A
CREE XPL HI 3D
CREE XPL HI 7A