LUMINTOP EDC18 CREE XPL HI 2800LM EDC LED FLASHLIGHT ANDÚRIL UI WITH MAGNETIC TAILCAP
SPECIFICATIONS
CARLCO CLEAR NARROW OPTICS ARE AVAILABLE HERE
18350 BATTERY TUBES ARE AVAILABLE HERE
Emitter: Three LEDs on a copper DTP MCPCB e.g.
Cree XP-L HI 1A(CW 6500K)
Optic: Standard TIR optics
Lens: Glass with anti-reflective coating
Flux: ~2800 lm (XP-L Hi), ~1600 lm (Nichia)
Intensity: ~12 500 cd ANSI throw ~223 m (XP-L Hi)
Firmware: The FW3A uses free software called Andúril,
distributed under the terms of the GPL v3. Code is available from
http://tiny.cc/TKAnduril
User interfaces: [1] By default the FW3A is set to use SMOOTH RAMPING.
Instant access to TURBO mode is also provided.
[2] A more conventional STEPPED RAMPING UI is available if you
like discrete modes level. You can choose how many steps you want.
[3] MOMENTARY mode is useful for signaling purposes or rapidly/briefly
lighting up targets. To exit this mode, physically disconnect power
[4] MUGGLE mode uses a reduced output.
[5] It has an electronic LOCKOUT for safety, but acts also as momentary
low light.Other functions: Battery check, sunset, beacon,
tactical strobe, party strobe, bike flasher, candlelight, lightning storm
Battery: One flat-top or button-top 18650 cell. An unprotected cell is recommended.
Max. length 66 mm. Battery is not included.
Driver: FET+7+1 driver. Low parasitic drain while OFF
Body: Aluminum with hard-coat anodizing
Switch: side switch
Ingress rating: Equivalent to IPX7
Weight: Approximately 76.5 g without cells
Size: 27.8 mm Ø head x 93.9 mm length.
