Specifications
Emitter: Single LEDs on a copper DTP MCPCB e.g.
Luminus SBT-90 LED
Luminus SBT-90 LED
Optic: Aluminum smooth reflector
Lens: Glass with anti-reflective coating
Flux: ~6500 lm
Intensity: ~163,800 cd ANSI throw ~810 m
Firmware: The X9L uses free software called Andúril,
distributed under the terms of the GPL v3. Code is available from
http://tiny.cc/TKAnduril
User interfaces: [1] By default the X9L is set to use SMOOTH RAMPING.
Instant access to TURBO mode is also provided.
[2] A more conventional STEPPED RAMPING UI is available if you
like discrete modes level. You can choose how many steps you want.
[3] MOMENTARY mode is useful for signaling purposes or rapidly/briefly
lighting up targets. To exit this mode, physically disconnect power
[4] MUGGLE mode uses a reduced output.
[5] It has an electronic LOCKOUT for safety, but acts also as momentary
low light.Other functions: Battery check, sunset, beacon,
tactical strobe, party strobe, bike flasher, candlelight, lightning storm
Battery: One flat-top or button-top 21700 cell. An unprotected cell is recommended.
Max. length 70.5 mm. Cell is not included.
Driver: FET+7+1 driver. Low parasitic drain while OFF
Body: Aluminum with hard-coat anodizing
Switch: Electronic tail switch
Ingress rating: Equivalent to IPX7
Weight: Approximately 126.3 g without cells
Size: 40 mm Ø head x 123.6 mm length x 25.2mm tube
compare with FW21 PRO
compare with FW21 PRO