LUMINTOP FW21 PRO 3X XHP50.2 3V LED 10000LM 21700

Emitter: Three LEDs on a copper DTP MCPCB e.g.

Cree XHP50.2 3V LED

Optic: Aluminum Orange Peel reflector

Lens: Glass with anti-reflective coating

Flux: ~10,000 lm

Intensity: ~26055 cd ANSI throw ~325 m

Firmware: The FW21 pro uses free software called Andúril,

distributed under the terms of the GPL v3. Code is available from

http://tiny.cc/TKAnduril

User interfaces: [1] By default the FW21 pro is set to use SMOOTH RAMPING.

Instant access to TURBO mode is also provided.

[2] A more conventional STEPPED RAMPING UI is available if you

like discrete modes level. You can choose how many steps you want.

[3] MOMENTARY mode is useful for signaling purposes or rapidly/briefly

lighting up targets. To exit this mode, physically disconnect power

[4] MUGGLE mode uses a reduced output.

[5] It has an electronic LOCKOUT for safety, but acts also as momentary

low light.Other functions: Battery check, sunset, beacon,

tactical strobe, party strobe, bike flasher, candlelight, lightning storm

Battery: One flat-top or button-top 21700 cell. An unprotected cell is recommended.

Max. length 70.5 mm. Battery is not included.

Driver: FET+7+1 driver. Low parasitic drain while OFF

Body: Aluminum with hard-coat anodizing

Switch: Electronic tail switch

Ingress rating: Equivalent to IPX7

Weight: Approximately 120 g without cells

Size: 40 mm Ø head x 102 mm length.