THESE ARE IN STOCK AND READY TO SHIP!
CARLCO CLEAR NARROW OPTICS CAN BE ADDED HERE
TURBO GLOW GASKETS CAN BE FOUND HERE
TURBO GLOW TAIL BUTTONS CAN BE FOUND HERE
These are custom fw3c's in polished copper. They use the stock driver that I modify and re flash with a modified version of anduril. You still have all of the same function as the original firmware but adds support for secondary leds. Secondary leds will be at the bottom of the ramp and brighten as it ramps up then switches to your primaries. These do not include turbo glow gaskets or buttons but can be added (they are listed under the turboglow section).
SPECIFICATIONS
Emitter: SAMUNG 351 5700K
Flux: ~2800 lm (XP-L Hi), ~1600 lm (Nichia)
Intensity: ~12 500 cd ANSI throw ~223 m (XP-L Hi)
Firmware: The FW3A uses free software called Andúril,
distributed under the terms of the GPL v3. Code is available from
http://tiny.cc/TKAnduril
User interfaces: [1] By default the FW3A is set to use SMOOTH RAMPING.
Instant access to TURBO mode is also provided.
[2] A more conventional STEPPED RAMPING UI is available if you
like discrete modes level. You can choose how many steps you want.
[3] MOMENTARY mode is useful for signaling purposes or rapidly/briefly
lighting up targets. To exit this mode, physically disconnect power
[4] MUGGLE mode uses a reduced output.
[5] It has an electronic LOCKOUT for safety, but acts also as momentary
low light.Other functions: Battery check, sunset, beacon,
tactical strobe, party strobe, bike flasher, candlelight, lightning storm
Battery: One flat-top or button-top 18650 cell. An unprotected cell is recommended.
Max. length 66 mm. Cell is not included.
Driver: FET+7+1 driver. Low parasitic drain while OFF
Body: Copper
Switch: Electronic tail switch
Ingress rating: Equivalent to IPX7
Weight: Approximately 53 g without cells
Size: 25.5 mm Ø head x 92.5 mm length.
User Manual:
